sonic test metallic pipe for Mexico
Product Description
Product Description
KWAYT Sonic tubes are Push-fit type CSL tubes are made by thin black annealed steel tube, with an enlarge end in a bell mouth shape .Specially designed rubber gasket for the bell mouth ensure quick installation and perfect sealing to keep the tube integrity and avoid the entry of other material.
Advantages. 1.Fast and easy installation by worker.
2.Push-fit assembly.
3.No welding required at jobsite.
4.No equipment required.
5.Easy fixing to rebar cage.
6.Push-fit mark to ensure full engagement.
Products details
Applications Drilled shafts are prepared for integrity testing by CSL during their construction by installation of at least three sonic tubes. These tubes are usually attached to the reinforcement cage along the full length of the shafts. After concrete has been poured, the tubes are filled with water. In CSL, a transmitter emits an ultrasonic signal in one tube and the signal is sensed some time later by the receiver in another sonic tube. Poor concrete between the sonic tubes will delay or disrupt the signal. The engineer lowers the probes to the bottom of the shaft and moves the transmitter and receiver upward, until the entire shaft length is scanned. The engineer repeats the test for each pair of tubes. The engineer interprets data in the field and later reprocesses it in the office.
Installations
KWAYT-SONIC tubes installation 1.Install a bottom cap onto the first sonic tube.
2.Fix the sonic tube to the rebar cage by tying the steel wire around the fixing ears and tube.
3.Fix the next tube to the rebar cage as the step 2.
4.Push the two tubes together.(Push-fit mark to ensure full engagement).
5.Ensure that both ears are aligned.Then connect tightly the ears of both tubes with a steel wire.
6.Repeat the process above till all tubes are installed.
Flaring Type
Popular Bell Mouth.
Groove Bell Mouth
Packing & Delivery
Bundle with every four or eight sonic pipes Loaded by container Shipping by sea Certifications
Contact us if you need more details on Sonic Test Metallic Pipe. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Sonic Test Metallic Pipe for Mexico、Sonic Test Metallic Tube. If these products fail to match your need, please contact us and we would like to provide relevant information.
KWAYT Sonic tubes are Push-fit type CSL tubes are made by thin black annealed steel tube, with an enlarge end in a bell mouth shape .Specially designed rubber gasket for the bell mouth ensure quick installation and perfect sealing to keep the tube integrity and avoid the entry of other material.
2.Push-fit assembly.
3.No welding required at jobsite.
4.No equipment required.
5.Easy fixing to rebar cage.
6.Push-fit mark to ensure full engagement.












2.Fix the sonic tube to the rebar cage by tying the steel wire around the fixing ears and tube.
3.Fix the next tube to the rebar cage as the step 2.
4.Push the two tubes together.(Push-fit mark to ensure full engagement).
5.Ensure that both ears are aligned.Then connect tightly the ears of both tubes with a steel wire.
6.Repeat the process above till all tubes are installed.
Flaring Type


Groove Bell Mouth
Packing & Delivery




Product Categories : Other Pipe > Crosshole Sonic Logging Pipe
Other Products
Hot Products
ERW Steel Pipe With Fixed Or Rotation Flange (Direct Manufacturer)screw anchors in solar panelsfusion bonded epoxy pipeGalvanized end cap designed as your requestHigh quality sonic logging pipe/tube /sounding pipe168*1.2/168*1.5/168*2.0 low price manufacturesonic test metallic pipe for MexicoSSAW large diameter steel tubeHigh Pressure Alloy TubeSSAW Steel Pipe FBE Coating PipeASTM galvanized square pipeAPI 5L X42,X46,X52 Gas Steel Pipegalvanized steel pipe chinastainless steel pipe cesaw steel pipeASTM A106B 2-1/2" SCH20 PipeISO2531 CLASS C Ductile Iron Pipe